Los Angeles / Culver City
Culver City has 39,931 residents (give or take 71) (ACS 2020-2024 5-year, table B01003, https://data.census.gov/table/ACSDT5Y2024.B01003?g=160XX00US0617568, checked 2026-10-19), about 7,811 people per square mile.
Culver City sits inside Los Angeles itself, under 3 miles from the Census center point for the city, and covers 5.112 square miles of land (Census 2024 Gazetteer internal points and land area, https://www2.census.gov/geo/docs/maps-data/data/gazetteer/2024_Gazetteer/, checked 2026-10-19).
The quote form takes a ZIP code; for Culver City that is 90230, 90232 (Census 2020 ZCTA to county subdivision and ZCTA to place relationship files, ZIP areas at least 20% inside the town, https://www2.census.gov/geo/docs/maps-data/data/rel2020/zcta520/tab20_zcta520_cousub20_natl.txt and https://www2.census.gov/geo/docs/maps-data/data/rel2020/zcta520/tab20_zcta520_place20_natl.txt, checked 2026-10-19).
Median household income in Culver City is $117,389 (ACS 2020-2024 5-year, table B19013, https://data.census.gov/table/ACSDT5Y2024.B19013?g=160XX00US0617568, checked 2026-10-19); many state and utility heat pump rebate programs set higher incentive tiers for income-qualifying households, so the household income on the application, not the town median, decides which level applies.
7,811 people per square mile puts Culver City in suburban density, where the outdoor unit usually sits in a side yard and the noise is not an issue for neighbors.
36% of Culver City homes are single-family detached, 12% are in two- to four-unit buildings and 41% are in buildings of five or more units (ACS 2020-2024 5-year, table B25024, https://data.census.gov/table/ACSDT5Y2024.B25024?g=160XX00US0617568, checked 2026-10-19).
With 41% of Culver City homes in buildings of five or more units and 36% detached, the condo association usually decides where outdoor units can go, so that approval comes before the quote. With 45% of Culver City homes rented (ACS 2020-2024 5-year, table B25003, https://data.census.gov/table/ACSDT5Y2024.B25003?g=160XX00US0617568, checked 2026-10-19), the landlord signs the quote in many of them.
Culver City has 11 points fewer detached houses than Los Angeles County overall (47%) (ACS 2020-2024 5-year, table B25024, https://data.census.gov/table/ACSDT5Y2024.B25024?g=050XX00US06037, checked 2026-10-19).
45% of Culver City homes are rented (ACS 2020-2024 5-year, table B25003, https://data.census.gov/table/ACSDT5Y2024.B25003?g=160XX00US0617568, checked 2026-10-19), so the market splits between resident-led jobs where the occupant picks the system and landlord-led jobs where they do not, and the rebate paperwork differs.
Of the 17,529 occupied homes in Culver City, 62% heat with natural gas, 0% with heating oil, 33% with electricity and 1% with propane (ACS 2020-2024 5-year, table B25040, https://data.census.gov/table/ACSDT5Y2024.B25040?g=160XX00US0617568, checked 2026-10-19).
Gas heats 62% of Culver City against electricity at 33%, so most quotes here are a partial-home system that carries the shoulder seasons and the summer while the gas furnace handles the coldest nights, or a whole-home system when the house is ready for it.
Culver City has about the Los Angeles County oil share of 0% and 4 points more electric heat than the county's 29% (ACS 2020-2024 5-year, table B25040, https://data.census.gov/table/ACSDT5Y2024.B25040?g=050XX00US06037, checked 2026-10-19).
No electric utility is on file for Culver City on this door yet, so this page does not name one; the name on the bill decides which rebate path applies.
LADWP Consumer Rebate Program heat pump HVAC, run by LADWP, is a live program for California addresses and publishes its terms without one headline figure (registry row 24 verified 2026-10-14, https://www.ladwp.com/residential-services/assistance-programs/consumer-rebate-program, checked 2026-10-16); confirm eligibility for the Culver City address before counting it. With 33% of Culver City homes already on electric heat and 63% on gas, oil or propane, the row that applies depends on the name on the electric bill and the fuel coming out.
Culver City has 18,803 housing units, 11% built before 1940 and 84% before 1980, with 7% built in 2000 or later (ACS 2020-2024 5-year, table B25034, https://data.census.gov/table/ACSDT5Y2024.B25034?g=160XX00US0617568, checked 2026-10-19).
Culver City has 3 points fewer pre-1940 homes than Los Angeles County as a whole (14%) and 5 points fewer homes built after 2000 than the county's 12% (ACS 2020-2024 5-year, table B25034, https://data.census.gov/table/ACSDT5Y2024.B25034?g=050XX00US06037, checked 2026-10-19).
The median Culver City home was built in 1963 (ACS 2020-2024 5-year, table B25035, https://data.census.gov/table/ACSDT5Y2024.B25035?g=160XX00US0617568, checked 2026-10-19) and the median home has 4.3 rooms (ACS 2020-2024 5-year, table B25018, https://data.census.gov/table/ACSDT5Y2024.B25018?g=160XX00US0617568, checked 2026-10-19).
84% of Culver City homes were built before 1980 and only 7% in 2000 or later (ACS 2020-2024 5-year, table B25034, https://data.census.gov/table/ACSDT5Y2024.B25034?g=160XX00US0617568, checked 2026-10-19), so most of the stock predates modern insulation codes; the installer's heat-loss calculation, not a square-footage rule, decides the tonnage.
Heating design temperature: 14F. Source: ENERGY STAR Design Temperature Limit Reference Guide (2019 Edition), Los Angeles County row, 99% heating, PDF pages 11 to 13 of 141 (Revised 11/11/2020), https://www.energystar.gov/sites/default/files/Design%20Temperature%20Limit%20Reference%20Guide%20(2019%20Ed)%20-%20ENERGY%20STAR%20Single-Family%20New%20Homes_Rev11.pdf, fetched 2026-10-19, 99%.
That 14F figure is the Los Angeles County cold-day number a Culver City heat pump is sized against, so ask the installer to show the system's heating output at 14F, not at the milder rating-label temperature.
Ask whether the quote is whole-home or partial-home, because with 62% of Culver City on gas and 33% already electric the two paths carry different rebate figures and different sizing.
Ask for the heat-loss calculation room by room; the median Culver City home has 4.3 rooms and was built around 1963, and the count of heads and the tonnage follow the rooms and the insulation, not the square footage.
The form on this page is the follow-up for Culver City. The public number is the number the contractor quotes from.
No local contractor is named on this door for Culver City yet. A request from this page goes to the first licensed shop that takes the door.